1. <nav id="by2ry"></nav>

      <table id="by2ry"></table>
      熱門搜索:教育裝備實驗器材,專業實驗室建設,新能源測試系統,大功率電源,高精度恒流源,電工電子實驗設備,信息工程實驗設備
      產品展示 / products 您的位置:網站首頁 > 產品展示 > 儀器儀表測試設備 > 接地電阻測試儀 > 聚源7630接觸電流測試器
      聚源7630接觸電流測試器

      聚源7630接觸電流測試器

      簡要描述:聚源7630接觸電流測試器產品特點:量測接觸電流時,亦可顯示人體仿真阻抗線路(MD)兩端的電壓 ,滿足接觸電流IEC 60990 標準要求;接觸電流可量測 AC/DC/AC+DC ,滿足醫療設備IEC 60601 標準要求;量測帶寬 DC - 1MHz,符合 IEC60990 接觸電流測試規范;可靈活選擇MD漏電流量測點(如: IEC60065 U1&U2),符合安規標準要求

      產品型號:

      所屬分類:接地電阻測試儀

      更新時間:2017-11-14

      廠商性質:生產廠家

      詳情介紹

      聚源7630接觸電流測試器

      7630 Touch Current Tester

      具有多項及創新功能,兼具大功率負載量測能力,適合所有接觸電流的測試應用;超大型 320 x 240 Graphic LCD ,可同時顯示量測電壓/接觸電流及測試時間;完整的自動化接口,如網絡卡、USB & RS-232、IEEE-488 (GPIB) 及其他接口,可執行自動化測試,亦可搭配華儀安規測試器,組成測試系統,提升測試效率。

      聚源7630接觸電流測試器產品特點

      • 量測接觸電流時,亦可顯示人體仿真阻抗線路(MD)兩端的電壓 ,滿足接觸電流IEC 60990 標準要求
      • 接觸電流可量測 AC/DC/AC+DC ,滿足醫療設備IEC 60601 標準要求
      • 量測帶寬 DC - 1MHz,符合 IEC60990 接觸電流測試規范
      • 可靈活選擇MD漏電流量測點(如: IEC60065 U1&U2),符合安規標準要求
      • 內建 7 組人體模擬阻抗(MD)與1組擴充空間,滿足多種安規標準要求
      • 可搭配華儀安規測試器組成安規六合一(ACW/DCW/IR/GB/RUN/LLT) 測試系統,縮短測試時間
      • MD 具有BNC量測端子,可外接示波器或電壓表讀取電壓值,方便對MD進行校準
      • 開機智能檢測功能,自動確認儀器輸出正常,確保測試的可靠度
      • 校正及預警時間設定功能,提醒用戶定期校正,確保測試質量
      • 測試結果可儲存過程中zui大漏電流 (Imax),滿足客戶對質量的要求
      • 可選配zui大峰值 75mApeak / 有效值 35mArms 量測,滿足安規機構測試驗證需求

      主要技術參數

       

      Specification :

      INPUT

      Voltage

      115/230 VAC ± 15%

      Frequency

      50/60 Hz ± 5%

      Fuse

      2A Slow-Blo 250V AC

      Line condition

      Power Switch

      Reverse polarity switch for normal condition (on / off / auto setting)

      Neutral Switch

      Neutral switch on/off selection for single fault condition

      Ground Switch

      Ground switch on/off selection for class I single fault condition

      Probe Setting

      Surface to Surface (PH- PL)

      Surface to Line(PH - L)

      Ground to Line (G - L)

      Ground to Neutral (G - N)

      Auto Function (G - N & G - L)

      SETTING

      Touch Current High Limit (RMS)

      Range:

      0.0uA~ 999.9uA/ 1000uA~5999uA/ 6.00mA~20.00mA

      Resolution:

      0.1uA/1uA/0.01mA

      Touch Current Low Limit (RMS)

      Range:

      0.0-999.9 uA

      Resolution:

      0.1uA

      Touch Current High Limit (Peak)

      Range:

      0.0uA - 999.9uA/ 1000uA - 9999uA/ 10.0mA - 30.0mA

      Resolution:

      0.1uA/1uA/0.1mA

      Touch Current Low Limit (Peak)

      Range:

      0.0-999.9 uA

      Resolution:

      0.1uA

      DISPLAY

      Touch Current Display (RMS)

      Range 1

      0.0uA~ 999.9uA, frequency DC - 1MHz

      Resolution

      0.1uA

      Accuracy

      DC : ±2% of reading + 3counts
      15Hz < f <100KHz : ±2% of reading + 3counts
      100KHz < f < 1MHZ : ±5% of reading (10.0uA - 999.9uA)

      Range 2

      1000uA~8500uA, frequency DC - 1MHz

      Resolution

      1uA

      Accuracy

      DC : ±2% of reading + 3counts
      15Hz < f <100KHZ : ±2% of reading + 3counts
      100KHz < f <1MHZ : ±5% of reading (10uA - 8500uA)

      Range 3

      8.00mA~20.00mA, frequency DC - 1MHz

      Resolution

      0.01mA

      Accuracy

      DC : ±2% of reading + 3counts
      15Hz < f < 1MHz : ±5% of reading (0.01mA -20.00mA )

      Touch Current Display (Peak)

      Range 1

      0.0uA~ 999.9uA, frequency DC - 1MHz

      Resolution

      0.1uA

      Accuracy

      DC : ±2% of reading +2uA
      15Hz < f <1MHZ : ±10% of reading +2uA

      Range 2

      1000uA ~ 8500uA, frequency DC - 1MHz

      Resolution

      1uA

      Accuracy

      DC : ±2% of reading +2counts
      15Hz < f <1MHz : ±10% of reading +2counts

      Range 3

      8.0mA ~ 30.0mA, frequency DC - 100KHz

      Resolution

      0.01mA

      Accuracy

      DC : ±2% of reading +2counts
      15Hz < f < 100KHz : ±10% of reading +2counts

      Measuring Device Module

      MD1

      IEC60990 Fig4 U2, IEC 60950-1, IEC60335-1, IEC60598-1, IEC60065, IEC61010

      IEC60990 Fig4 U1, IEC60065

      MD2

      IEC60990 Fig5 U3, IEC60598-1

      IEC60990 Fig5 U1

      MD3

      IEC 60601-1

      MD4

      UL544NP, UL484 , UL923, UL471, UL867, UL697

      MD5

      UL544P

      MD6

      UL1563

      MD7

      IEC60950, IEC61010-1 FigA.2 (2K ohm) for RUN Test MD Circuit.

      External MD

      Basic measuring element 1k ohm

      MD Voltage Limit

      70Vdc

      Leakage Current Offset

      Range:

      0 - 999.9uA

      Resolution:

      0.1uA

      DUT POWER

      AC Voltage

      0.0-277.0V

      AC Current

      40Arms max continuous

      Over Current Protection

      50Arms, Response Time < 3 sec / 250Apeak Response Time <10u sec

      AC Voltage High/Low Limit

      Range:

      0.0-277.0V

      Resolution:

      0.1V/step

      AC Voltage Display

      Range:

      0.0 - 277.0 V

      Resolution:

      0.1 volt / step

      Accuracy:

      ±(1.5% of reading + 2 counts) , 30.0 - 277.0VAC

      Delay time setting

      Range:

      0.2 !V 999.9 seconds

      Resolution:

      0.1 second

      Timer display

      Range:

      0.0 !V 999.9 seconds

      Resolution:

      0.1 second

      Accuracy:

      ± (0.1% of reading + 0.05 seconds)

      GENERAL

      PLC Remote Control

      Input - Test, Reset, Interlock & Recall File 1 through10

      Output - Pass, Fail, Test-in-Process, Start-Out, Reset-Out

      Scanner Control

      It is applied to control Matrix Scanner (Model 7006)

      Memory

      50 memories , 30steps per each memory . Max. Result Display 900 data (30 memories x 30 steps)

      Auto Reverse Function

      AUTO Reverse ON / OFF parameter setting selection
      Automatic Reverse polarity switch for normal condition in one step setting menu.
      Only display maximum leakage current value.

      Scope Output Interface

      At rear panel BNC type to connet scope for some IEC standards test requirement and application.

      Display

      320 X 240 graphic LCD

      LCD Contrast Setting

      Range: 1-9; 1 is lightest character, 9 is darkest character.

      Alarm Volume Setting

      Range: 0-9; 0=OFF, 1 is softest volume, 9 is loudest volume.

      Security

      Lockout capability to avoid unauthorized access to test set-up programs.

      Calibration

      Software and adjustments are made through front panel,
      Automatic Calibration alert function to signal operator when calibration is due.

      Results Display

      All test result information will be displayed on the screen.

      Interface

      RS232 standard

      Safety

      Product with TUV/GS certificate

      Dimension

      430 (W) x 133(H) x 300 (D) mm

      Weight

      12 Kg

      STANDARD ACCESSORIES

      Power Cord

      X1

      Fuses

      X2 (Including a spare contained in the fuse holder)

      Interlock Disable Key(1505)

      X1

      TC Receptacle Adaptor Box (1932)

      X1

      Hipot Test Lead for PH / PL (1101)

      X2

      RS232 Link Cable 1.5m(1130)

      X1

      DUT Power Cable 40A(1148)

      X1

      RUN Module (Opt.752)

      W

      Range : 0-1KW / 1-10KW Resolution : 0.5W / 5W

      A

      Range : 0.000 !V 3.500 A / 3.00 - 40.00A , Resolution : 0.001A / 0.01A

      PF

      0.000 -1.000

      Leakage Current

      Range : 0.00 - 10.00mA , Resolution : 0.01mA

      AC Current High/Low Limit Setting

      Range:

      0-40A

      Resolution:

      0.01A/step

      AC Current Display

      Range:

      0.000 !V 3.500 A / 3.00 - 40.00A

      Resolution:

      0.001A / 0.01A

      Accuracy :

      ± (2 % of reading + 5 counts) / ± (2 % of reading + 2 counts)

      AC Power High/Low Limit Setting

      Range:

      0 - 10KW

      Resolution:

      1W

      AC Power Display

      Range:

      0.0 -1000.0W / 1000 - 10000W

      Resolution:

      0.5W / 5W

      Accuracy :

      ±(2 % of reading + 2 counts )

      Power Factor High/Low Limit Setting

      Range:

      0.000 - 1.000

      Resolution:

      0.001

      Power Factor Display

      Range:

      0.000 - 1.000

      Resolution:

      0.001

      Accuracy :

      ± (2 % of reading + 2 counts )

      Leakage Current High/Low Limit Setting

      Range:

      0.00 - 10.00mA

      Resolution:

      0.01mA

      Leakage Current Display

      Range:

      0.00 - 10.00mA

      Resolution:

      0.01mA

      Accuracy :

      ± (2 % of reading + 2 counts )

      Delay Timer Setting

      Range:

      0, 0.2 - 999.9

      Resolution:

      0.1

      Dwell Timer Setting

      Range:

      0, 0.1-999.9 (0=continuous)

      Resolution:

      0.1

      Timer display

      Range:

      0.0 - 999.9 seconds

      Resolution:

      0.1 second

      Accuracy:

      ± (0.1% of reading + 0.05 seconds)

      Power Control

      It is applied to control Transformer Box (1931/1931S) or AC Power Source(6700/6800/6400 Series)

      HV & GB Link Module (Opt. 753)

      Max. ACW 4000VAC, DCW 4000VDC & Max. Ground Bond 40A

      GPIB Interface Card (Opt. 731)

      Printer Port Interface Card (Opt. 732)

      Multi-function Interface Card (Opt. 751)

      Including USB port A type, combination of RS-232, RS-485 port, and Bar Code Input with internal memory capability.

      High Measurement Range 35mArms / 70mApeak & 4MDs (Opt. 754 )

      35mArms / 70mApeak for IEC60990 fig4(U1 and U2), IEC60990 fig5(U1 and U3), UL484, IEC60601 Test Requiremt ,
      Notice : Option this MD circuit have to replace MD module all MD circuits .

      Transformer Box (Option) Add this option must optional Opt.752 RUN Module.

      1931 Series Transformer Box
      (500VA/ 1KVA/1.8KVA/3.6KVA)

      Multi-Tape of 1.0, 1.06, 1.1 times of input voltage.

      1931-S Series Transformer Box
      (500VA/ 1KVA/1.8KVA/3.6KVA)

      Multi-Tape of 0.8, 0.85, 0.9, 1.0, 1.06, 1.1 times of input voltage.

      AC Power Source (Option) Add this option must optional Opt.752 RUN Module.

      6800 Series Digital AC Power Source (6805, 6810 , 6820 , 6830 and 6840 )

      6700 Series Programmable AC Power Source (6705, 6710 , 6720 , 6730 and 6740 )

      6400 Series AC Power Source (6402, 6403, 6405, 6410 )



      留言詢價

      留言框

      • 產品:

      • 您的單位:

      • 您的姓名:

      • 聯系電話:

      • 常用郵箱:

      • 省份:

      • 詳細地址:

      • 補充說明:

      • 驗證碼:

        請輸入計算結果(填寫阿拉伯數字),如:三加四=7
      • 聯系電話電話010-52906249
      • 郵箱郵箱wjypk2008@163.com
      • 地址公司地址北京市昌平區百沙路青年創業大廈B座111-120室
      © 2022 版權所有:北京新能聚源科技有限公司   備案號:京ICP備17061472號-1   sitemap.xml   管理登陸   技術支持:化工儀器網
      • 電商入口

      聯系我們

      contact us

      返回頂部




      扒开双腿疯狂进出视频,z0z0z0女人极品另类zozo,第九色,国产天堂亚洲国产碰碰